Samsung M60 - Manual (Page 184)

183
Q
When no headset is found or cannot be
connected
A1 If the headset is already connected to another
device, you will not be able to find the headset and
cannot connect to the headset even if the headset is
found. Disconnect the connection to the other device
and then start the search again.
A2 If the headset is connected to a power adapter, you
cannot make a Bluetooth connection.
Disconnect the power adapter and then retry.
A3 In general, a Bluetooth headset has 2 operating
modes, On/Off mode and Pairing mode.
To connect the headset to another Bluetooth device
such as a PC or cell phone, the headset must be in
Pairing mode.
Switch the headset to Pairing mode and then retry
the search operation.
In general, the headset in Pairing mode automatically
returns to On/Off mode after a certain period of time.
Q
There is no sound or sound is intermittently
interrupted after connecting a headset
A1 If your headset is a mono headset, check if a mono
headset connection has been made. In this case, to
resolve the problem, complete the procedures below.
 Double-click the Bluetooth icon in the notification
area of the Taskbar, select the Audio tab and
check the connectivity of the Bluetooth Hands
Free Audio Device that corresponds to the
headset in the Connected Device List. If it is not
con-nected, right-click over the device and select
Connect.
 Right-click the Speaker icon in the notification
area of the Taskbar, select Play Device >
Bluetooth Audio > Load Defaults and then click
the OK button.
 After changing the Bluetooth or sound settings,
you have to exit and re-launch the audio and
video player programs to apply the changes.
Note
The Bluetooth Mono Headphone and Microphone
functions are activated.