Sanyo PDG-DWL2500 - Manual (Page 39)

39
Select Digital zoom +. The On-Screen Menu disappears
and D . zoom + appears. Press the SELECT button to
expand the image size. Use the Point
ed7 8 buttons to
pan the image. The Panning function can work only when
the image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
e or the SELECT button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
ed and the SELECT buttons.
Select Digital zoom -. The On-Screen Menu disappears and
D . zoom - appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing
the D.ZOOM
d or the SELECT button on the remote control.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (See pages
30-31) again, or adjust the screen size with the D.ZOOM
ed buttons.
4 Note:
• The panning function may not operate
properly if the stored Mode in the PC adjust
Menu is used (p.35).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when
Custom is selected for the screen size.
• True and Digital zoom +/- can not be
selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.32).
• Digital zoom +/- can not be selected when
True is selected in the Screen menu. (p.38)
Remote Control
D .ZOOM e button
POINTed7 8
buttons
SELECT button
D .ZOOM d button
Adjust the screen scale and position manually with this
function.
Press the Point
8 button at Custom adj . and the Custom
adjustment menu is displayed on the screen, you can use
the Point
ed buttons to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at "Yes". When Custom
is selected, the saved scale or position is
used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes".
4 Note:
• When no signal is detected, Normal is set
automatically and Custom adj. cannot
be selected and the Aspect dialog box
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
Custom adj . Menu
Custom adj .
Computer Input
Digital zoom +
Digital zoom –
D .ZOOM +/–