Sega 999-0886-01 - Manual (Page 51)

46 www.seuservice.com
The items listed below require periodic check and maintenance to retain the performance of this machine and
ensure safe operation.
14. PERIODIC INSPECTION TABLE
Be sure to check once a year to see if Power Cords are damaged, the plug is securley inserted, dust
is accumulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as
is accumulated can cause a fire or electrical shock.
Periodically once a year, request the place of contact herin stated or the Distributer, etc. where the
product was purchased from, as regards to the interior cleaning. Using the product with dust as is
accumulated in the interior without cleaning can cause a fire or short circuit accident. Note that
cleaning the interior parts can be performed on a pay-basis.
CLEANING CABINET SURFACES
If the cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then
squezzed dry. Do not use thinner, benzine, alcohol or chemical dustcloth as these can damage Cabinet surfaces.
SEAT (Greasing to Seat Rail Portion)
Move the Seat to the rearmost portion and apply spray greasing to the
portion shown at the right once every 3 months by using NOK KLUBER
L60 or GREASE MATE SEGA PART No. 090-0066. After greasing, move
seat a few times forward and backward so as to allow the grease to be
applied all over uniformly. Be sure to wipe grease which attaches to the
surfaces of the PROTECT RUBBER on the seat Rail, or any excess grease.
INTERVAL
Daily
Monthly
Monthly
Tri-Monthly
Tri-Monthly
Monthly
Tri-Monthly
Tri-Monthly
Monthly
Monthly
Monthly
Tri-Monthly
Monthly or when moving
Weekly
Bi-Monthly
Tri-Monthly
Monthly
Monthly
As occasion arises
Annually
REFERENCE
4
8
8
9
9
10
10
10
9
4
11
11
12
12
Next page
7
7
Next page
See Above
CABINET
HANDLE MECHA
ACCEL. & BRAKE
SHIFT LEVER
COIN CHUTE TOWER
MONITOR
SEAT
GAME BD
CABINET SURFACES
INTERIOR
POWER SUPPLY PLUG
ITEM
Check Adjusters’ contact with surface.
Check lamp.
Check VOLUME VALUE.
Check ADJUST GEAR engagement.
Greasing of GEAR.
Check VOLUME value.
Check ADJUST GEAR engagement
Gear and Spring portion greasing.
Check Switches.
Check COIN SW.
Coin insertion test.
Cleaning of COIN SELECTOR.
Check adjustments.
Cleaning of CRT surfaces.
Antistatic measures.
Applying grease to Seat Rail.
MEMORY TEST.
Check Settings.
Cleaning
Cleaning
Inspection and cleaning.