Sanyo CLT-D6623(WH) - Manual (Page 13)

3
GETTING.STARTED
NOTE: Before using the handset and to prolong battery life, place the handset in
the base handset cradle and charge for at least 15 hours.
. . . . . . . . . .
Attaching.the.belt.clip
Belt clip installation
1. Attach the belt clip by inserting the sides of the belt clip into the slots.
2. Snap the ends of the belt clip into place.
BASIC.FUNCTIONS
Standby.mode.and.sleep.mode
When the handset has been inactive for a while, it will enter sleep mode and the
LCD backlight and key lights will switch off. Touch any key to return to standby
mode. The LCD backlight and key lights will activate to indicate standby mode.
To adjust the time from standby to sleep mode, please refer to HANDSET
SETTINGS - CHANGE DISPLAY SETTINGS ( page 5 ).
NOTE: If keylock is on you will need to unlock phone to enter standby mode.
Making.and.receiving.calls
To.make.a.call:
• Touch
to get a dial tone.
• Enter destination phone number using 0.-.9. If you make an error, touch
to cancel.