Samsung 181T User Manual
Page 24
Connecting
Your Monitor
Installing the
Monitor Driver
Installing VESA
compliant mounting
Setup-General
Setup-For Multimedia model (Option)
Setup-General
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adaptor.
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
Setup-For Multimedia model (Option)
1.
Connect the power cord of the multimedia stand to the multimedia stand power port on the
back of the monitor.
SyncMaster 171S/171V