Sharp CD G14000 - Manual (Page 18)

08/1/15 CD-G14000_EN.fm
18
Basic Operation
TINSEA128AWZZ
CD-G14000
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Display brightness control
To dim the display brightness, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Bass control (X-BASS)
Equalizer
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
Note:
The extra bass mode is canceled when the EQUALIZER MODE
button is pressed.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
TIMER
POWER ON/ STAND-BY
CD
TUNER
(BAND)
4 3
1
5
4
5
3
2
1
PRESET
TUNING
PRESET
TUNING VOL. VOL.
REMOTE
SENSOR
2
TAPE (1 2)
OPEN/
CLOSE c
AUDIO IN
— VOL. VOL.
POWER
ON/ STAND-BY
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase. When
it is turned counterclockwise, the volume
will decrease.
Remote control operation:
Press the VOLUME (+ or –) button to
increase or decrease the volume.
When the power is first turned on, the unit
will enter the extra bass mode which
emphasizes the bass frequencies, and “X-
BASS” will appear. To cancel the extra
bass mode, press the X-BASS/DEMO
button.
30 MAXIMUM 0 .....
For rock music.
For pop music.
No equalization.
For classical music.
For jazz.
FLAT
ROCK
CLASSIC
POPS
VOCAL
JAZZ
Vocals are
enchanced.