Important safety instructions, Danger, Warning – Sharper Image EVSI-HTR70 User Manual

Page 2

Advertising
background image

2

Thank you for purchasing The Sharper Image

®

Flat Panel Ceramic Tower Heater.

This product, along with the entire The Sharper Image

®

collection, connects

innovation with cutting-edge design to provide you with years of dependability
and enjoyment.

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE
PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING

DANGER

- TO REDUCE THE RISK OF ELECTRIC SHOCK:

• The output of this heater may vary and its temperature may become intense enough
to burn exposed skin. Persons with reduced sensitivity to heat or an inability to react
to avoid burns should not use this device.
• Individuals with diabetes should not use this device.
• Always unplug the appliance from the electrical outlet immediately after using and
before cleaning.
• Keep cord away from heated surfaces.
• DO NOT place the heater near a bed because objects such as pillows or blankets
can fall off the bed and be ignited by the heater.
• DO NOT reach for an appliance that has fallen into water. Unplug it immediately.
• DO NOT use while bathing or in the shower.
• DO NOT place or store appliance where it can fall or be pulled into a tub or sink.
• DO NOT place in or drop into water or other liquid.
• NEVER use pins or other metallic fasteners with this appliance.
• DO NOT leave heater unattended while ON.

3

• DO NOT use heater while sleeping.
• Keep dry - DO NOT operate in a wet or moist condition.
• This appliance is designed for personal, non-professional use only.
• Do not use attachments not recommended by The Sharper Image;
specifically any attachments not provided with the unit.
• Check your heater cord and plug connections.
a) Faulty wall outlet connections or loose plugs can cause the outlet
or plug to overheat. Be sure the plug fits tight in the outlet.
b) This heater draws 12.5 amps during operation. To prevent
overloading a circuit, do not plug the heater into a circuit that
already has other appliances working.

CAUTION: It is normal for the plug to feel warm to the

touch; however, a loose fit between the AC outlet
(receptacle) and plug may cause overheating and
distortion of the plug. Contact a qualified electrician to
replace loose or worn outlet.

WARNING

- TO REDUCE THE RISK OF BURNS,

ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS:
• This heater is hot when in use. To avoid burns, do not let bare

skin touch hot surface. If provided, use handles when moving
this heater. Keep combustible materials such as furniture, pillows,
bedding, papers, clothes and curtains at least three feet from the
front of the heater and keep them away from the sides and rear.

• Extreme caution is necessary when any heater is used by or near

children or invalids and whenever the heater is left operating and
unattended.

• Always unplug the heater when not in use.
• Do not operate the heater with a damaged cord or plug, or after

the heater malfunctions, has been dropped or damaged in any
manner. Discard the heater or return to SI Products Service facility
for examination, electrical or mechanical adjustment, or repair.

Caution: All
servicing of
this product
must be
performed
by
authorized
SI Products
Service
Personnel
only.

Advertising