Samsung CLX-6200ND - Manual (Page 69)

Maintenance _ 69
4. Take a new paper transfer belt out of its package.
5. Holding the handle on the new paper transfer belt, align it with the slots
on the inside of the front cover.
6. Lower the paper transfer belt until it is parallel with the front cover and
firmly seated.
7. Close the front cover firmly.
8. Turn the machine on.
MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts,
and to maintain your machine in top working condition the following
condition, the following items will need to be replaced after the specified
number of pages, or when the life span of each item has expired.
We highly recommend that this maintenance be performed by an authorized
service provider, dealer or the retailer where you bought the machine. The
warranty does not cover the replacement of the maintenance parts after
their lifespan.
Checking replaceables
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed or scanned. Replace the
corresponding parts, if necessary.
1. Press Menu ( ) until System Setup appears on the bottom line of the
display and press OK.
2. Press the left/right arrow until Maintenance appears and press OK.
3. Press the left/right arrow until Supplies Life appears and press OK.
4. Press the left/right arrow until the item you want appears and press OK.
• Supplies Info: Prints the supply information page.
• Total: Displays the total number of pages printed.
• ADF Scan: Displays the number of pages scanned using the ADF.
• Platen Scan: Displays the number of pages scanned using the
scanner glass.
• Transfer Belt, Fuser, Tray1 Roller, Tray2 Roller, MP Tray
Roller: Displays the number of pages printed each item.
5. If you selected to print a supply information page, press OK to confirm.
6. Press Stop/Clear to return to ready mode.
• Don't use sharp objects, such as a knife or scissors, to open
the paper transfer belt package. You could damage the
surface of the paper transfer belt.
• Be careful not to scratch the surface of the paper transfer belt.
ITEMS YIELD (AVERAGE)
Fuser unit Approx. 100,000 pages
DADF (or ADF) friction pad Approx. 20,000 pages
DADF (or ADF) pick-up roller Approx. 80,000 pages
Pick-up roller (Multi-purpose tray,
FCF a , Optional tray 2)
a. First cassette feeder (Tray1)
Approx. 70,000 pages
Friction pad (Multi-purpose tray,
FCF, Optional tray 2)
Approx. 70,000 pages