Amplifier operation, Selecting the component, Listening to fm/am radio – Sony HT-DDW665 User Manual

Page 13: Selecting the component listening to fm/am radio

Advertising
background image

Ampl

ifier O

p

e

ration

masterpage:Right

lename[E:\SEM_Janet\J9040000_4252086821DDW665US\4252086821\GB04BSC_HT-

DDW665-US.fm]

13

US

model name1[HT-DDW665]

[4-252-086-82(1)]

1

Press input buttons to select the input.

The selected input appears in the display.

2

Turn on the component and start
playback.

Note

If you select the VCR or DVD player, set the
TV’s video input to match the component you
selected.

3

Turn MASTER VOLUME –/+ to adjust
the volume.

Note

To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.

To mute the sound

Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.

To use the headphones

Connect the headphones to the PHONES jack.
When the headphones are connected, speaker
output is automatically canceled and “SP” does
not light up in the display.

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM
antennas to the receiver (see page 7).

Tip

The tuning scale is:

FM: 100 kHz
AM: 10 kHz*

* The AM tuning scale can be changed (see page 32).

Automatic tuning

If you do not know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.

1

Press FM or AM to select the FM or AM
band.

The last received station is tuned in.

2

Press TUNING + or TUNING –.

Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.

Tip

If “STEREO” flashes in the display and the FM stereo
reception is poor, press FM MODE to change to
monaural (MONO). You will not be able to enjoy the
stereo effect, but the sound will be less distorted. To
return to stereo mode, press FM MODE again.

Amplifier Operation

Selecting the component

To select the

Press

VCR

VIDEO

DVD player

DVD

Built-in tuner (FM/AM)

FM or AM

Listening to FM/AM radio

continued

GB01COV_HT-DDW665-US.book Page 13 Monday, April 26, 2004 10:03 AM

Advertising