Adjusting the sound characteristics, Attenuating the sound, Changing the sound and display settings – Sony CDX-C780R User Manual

Page 23

Advertising
background image

23

EN

Other Functions

Adjusting the sound
characteristics

You can adjust the bass, treble, balance and
fader.
Each source can store the bass and treble levels
respectively.

1

Select the item you want to adjust by
pressing
(SOUND) repeatedly.

VOL (volume) n SUB (subwoofer volume)
n

BAS (bass) n TRE (treble)

n

BAL (left-right) n FAD (rear-front)

2

Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
functions as the volume control.)

Attenuating the sound

Press (ATT) on the rotary commander or
wireless remote.
“ATT on” flashes momentarily.

To restore the previous volume level, press
(ATT)

again.

Tip
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).

Changing the sound and
display settings

You can set:
• Clock (page 7).
• CT (Clock Time) (page 21).
• D.Info (Dual Information) to display the

clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).

• Amber/Green to change the illumination

colour to amber or green.

• Dimmer to change the brightness of the

display.
— Select “Auto” to dim the display only

when you turn the lights on.

— Select “on” to dim the display.

• Contrast to adjust the contrast if the

indications in the display are not
recognizable because of the unit‘s installed
position.

• Beep to turn on or off the beeps.
• RM (Rotary Commander) to change the

operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary

commander as the factory-set position.

— Select “rev” when you mount the rotary

commander on the right side of the
steering column.

• Loud (Loudness) to enjoy bass and treble

even at low volume. The bass and treble will
be reinforced.

• LPF (Low Pass Filter) (page 24)
• A.Scrl (Auto Scroll) (page 9, 25)

1

Press (SHIFT).

2

Press (3) (SET UP) repeatedly until the
desired item appears.

Each time you press (3) (SET UP), the item
changes as follows:

Clock n CT n D.Info* n Amber/Green n
Dimmer n Contrast n Beep n RM n Loud*
n LPF* n A.Scrl*

*

When you have not tune the station or there
is no CD/MD being played, these items will
not appear.

Note
The displayed item will differ depending on
the source.

continue to next page n

Advertising