Siemens 2015 - Manual (Page 14)

Incoming calls
5
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap03.fm5 29.10.99
Incoming calls
Displaying telephone numbers
A call is signalled by means of tone ringing.
If the carrier supports calling line identification presenta-
tion (CLIP), the telephone number of the external caller
appears on the display of your handset:
Internal calls can be made if more than one handsets are
being operated. You can recognise an
internal call by the
following display (a call from station 2 in the following ex-
ample):
Taking a call
1. If the handset is in the base station or charging
unit:
2. If the handset is not in the base station or charg-
ing unit:
:
- - -
f
N F
08972244667
f
N F
2
f
N G
Remove the handset from the charging unit. You are con-
nected.
Automatic call acceptance after removing the
handset from the charging unit can also be
deactivated (➔ page 32). If this function has
been deactivated, you must press
c when
you remove the handset from the charging unit.
c
Press the key on the handset (“off-hook”). You are con-
nected.