Samsung BD-C7900 - Manual (Page 37)

English

05
Setup
DTS Neo:6
You can enjoy multi-channel sound from a simple
2-channel audio source.
Off : Outputs a 2-channel audio signal through
the front speakers only.
Cinema : Outputs 2-channel movie sound over
multi-channels.
Music : Outputs 2-channel music over multi-
channels.
NOTE
If you are using an HDMI receiver, this option is
available when you set Digital Output setup to PCM.
HDMI Audio Output
Set the audio output method when a receiver is
connected to the player.
Auto : If the HDMI OUT 1 and HDMI OUT 2
terminals are connected to a TV and receiver
respectively, you will hear audio through the
device connected to HDMI OUT 2.
If the receiver is not connected to the player or
turned off, you will hear audio through the TV
speakers.
HDMI 1 & HDMI 2 : You can listen to the audio
from both the receiver and TV speakers.
Audio Sync
In some cases when the player is connected to a
digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
You can set the audio delay time between 0
msec and 200 msec.
Adjust it to the optimal setting.
NOTE
The audio delay time you specify may not be exact
depending on the played content.
•
•
•
✎
▪
•
•
•
✎
▪
HDMI
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you set Bitstream (either Re-
encode or Audiophile) on your setup menu.
If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
Dynamic Range Control
You can listen at low volumes but still hear dialog
clearly.
This is only active when a Dolby Digital signal is
detected.
Auto : The Dynamic Range Control will be set
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
Off : Turn Dynamic Range Control off.
On : Choose to listen to a movie at a lower
volume without losing clarity of dialog.
Downmixing Mode
Select whether to downmix the multi-channel
audio into fewer channels.
Normal Stereo : Downmixes the multi-channel
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
Surround Compatible : Downmixes multi-
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
•
•
•
•
•
•
•