Samsung 6050 - Manual (Page 24)

2-10 Setting Up Your Printer
IN CASE OF PLUG AND PLAY
For Windows 95
1. Make sure the printer is plugged and connected to your computer.
2. Turn on the printer and start Windows on your computer.
3. Windows recognizes the printer, and ‘New Hardware Found’
dialog box is displayed.
4. Click on the OK button.
5. Insert the CD-ROM into your CD-ROM drive, and click on the
Browse button.
6. Select the CD-ROM drive, then click on the OK button.
7. Follow steps 2 through 4 on page 2-9 to complete the installation.
For Windows 98
1. Make sure the printer is plugged and connected to your computer.
2. Turn on the printer and start Windows on your computer.
3. Windows recognizes the printer, and the Add New Hardware
Wizard dialog box is displayed.
4. Select Search for the best driver for your device
(Recommended) , then click on the NEXT button.
5. Insert the CD-ROM into your CD-ROM drive, then click on the
Browse button.
6. Select the CD-ROM drive, then click on the OK button.
7. Follow steps 2 through 4 on page 2-9 to complete the installation.