Sharp XG-C58X - Manual (Page 77)

Easy to Use Functions
-73
Setting up a Password
Entering the Password
Select “ Password ” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
1
Press '
' ' ' ' or " " " " " to select the de-
sired number and then press |
| | | |.
2
Enter the 3 remaining digits
and press
.
3
Enter the password again in
“Reconfirm” and press
.
Note
• When a password is set, you need
to enter the password to change “PRJ
Mode”, “Keylock Level”, “RS-232C”,
“Anti-Theft” and “All Reset” settings.
A password can be set by the user to prevent adjustments to certain settings on the “Options
(2)” menu. Using a password together with the Keylock Level (page
71 ) is more effective.
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
Selecting the Transmis-
sion Speed (RS-232C)
Select “RS-232C” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
Note
• When a password has been set, and “RS-
232C” is selected, the password input box
will be displayed.
• Make sure that both the projector and computer
are set for the same baud rate. Refer to the
computer’s operation manual for instructions
for setting the computer’s baud rate.