Adding simpleshare to an existing workgroup, Adding simpleshare to an existing workgroup 30 – SimpleTech SimpleShare User Manual
Page 44
Advertising
30
Managing SimpleShare
Administration
A
DDING
S
IMPLE
S
HARE
TO
AN
E
XISTING
W
ORKGROUP
1
In the Administration menu, click Windows Setup.
2
Select Workgroup Member Mode, then in Workgroup
Name, type the name of the workgroup to which you are
making SimpleShare a member.
3
Select the share access method to be enabled on
SimpleShare.
•
To provide share access to all users in a Workgroup,
select Password Based Share Access.
•
To limit share access to selected users in a
Workgroup, select User Based Share Access, then
from the Pool Name list choose the disk pool to
which access is being granted.
4
After making your selections, click
.
5
In the confirmation dialog, click
.
Apply
OK
Advertising