Samsung Digimax V4000 - Manual (Page 95)

95
PLA
Y
Start up sound
You can select the sound that is activated whenever the camera is turned on.
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [S. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [S.
SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
1. Press the menu button and press the RIGHT button twice to
select [MyCAM](Third) tab.
2. Press the DOWN button and the cursor will be shifted to the main menu.
3. Select the [SH. SOUND] menu by pressing the UP/DOWN button.
4. Press the RIGHT button and the cursor will shift to the [SH.
SOUND] sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
6. Press the OK button to confirm the setting.
Press the menu button twice and the menu display will disappear.
Shutter sound
You can select the shutter sound.
MOVE:
PLAY SETUP MyCAM
CHANGE:
S.IMAGE
S.SOUND
SH.SOUND
IMAGE2
SOUND1
SH.SOUND1
BACK:
PLAY SETUP MyCAM
SET:OK
S.IMAGE
S.SOUND
SH.SOUND
OFF
SOUND1
SOUND2
SOUND3
BACK:
PLAY SETUP MyCAM
SET:OK
S.IMAGE
S.SOUND
SH.SOUND
OFF
SH. SOUND1
SH. SOUND2
SH. SOUND3
MOVE:
PLAY SETUP MyCAM
CHANGE:
S.IMAGE
S.SOUND
SH.SOUND
IMAGE2
SOUND1
SH.SOUND1