Sharp 27SC260 - Manual (Page 16)

16
Dimension: 140 X 215 mm
2 1
STEREO
SAP
ON
ON
A I R
A I R
MONO
H AUDIO ADJUST
When the “E” mark is at “AUDIO ADJUST”, press VOL k/l to
access the AUDIO ADJUST screen. To access the desired item,
press CH a/s. To adjust the audio setting, press VOL k/l.
6
Press MENU to exit.
An example screen displaying ON AIR Analog Channel when receiving stereo broadcasts
Current channel number
“ ← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while receiving video signals from INPUT terminals does not change the type of sound;
in this case, sound is determined by the video source.
• If “FAO” mode is on, “SPEAKER” mode will automatically turn off. Changing “SPEAKER” setting will
not affect “FAO” mode.
Audio Select (Continued)
(Analog CHANNEL call on screen)
TREBLE RESET BASS BALANCE
Selected item VOL k button VOL l button
TREBLE To increase treble response. To decrease treble response.
BASS To increase bass response. To decrease bass response.
BALANCE To emphasize the right To emphasize the left
speaker’s volume. speaker’s volume.
RESET To return all adjustments to factory preset levels.
TREBLE 0
15-17.indd 16 11/23/05 11:15:29 AM