Windshield wiper and washer lever – Suzuki SX4/SX4 SEDAN User Manual

Page 71

Advertising
background image

3-6

STEERING COLUMN CONTROLS

80J21-03E

Turn Signal Operation

With the ignition switch in the “ON” posi-
tion, move the lever up or down to activate
the right or left turn signals.

Normal turn signal

80JC033

Move the lever all the way upward or down-
ward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.

Lane change signal

80JC034

Some times, such as when changing
lanes, the steering wheel is not turned far
enough to cancel the turn signal. For con-
venience, you can flash the turn signal by
moving the lever part way and holding it
there. The lever will return to its normal
position when you release it.

Windshield Wiper and Washer
Lever

Windshield Wipers

80JC035

To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the “INT” position (if
equipped), the wipers operate intermit-
tently. The “INT” position is very convenient
for driving in mist or light rain. In the “LO”
position, the wipers operate at a steady
low speed. In the “HI” position, the wipers
operate at a steady high speed. To turn off
the wipers, move the lever back to the
“OFF” position.
Move the lever up and hold it to the “MIST”
position, the windshield wipers will turn on
continuously at low speed.

EXAMPLE

EXAMPLE

MIST

OFF

INT

LO

HI

EXAMPLE

Rear Window Wiper/Washer Switch: 8
Tilt Steering Lock Lever: 6
Cruise Control: 7, 8

Advertising