Samsung HT-WX70 - Manual (Page 12)

ENG
CONNECTIONS
23 22
Connecting Audio from External Components
(Con’t)
Connecting the FM Antenna
SPEAKERS OUT
(IMPEDANCE 3 Ω)
FM Antenna (supplied)
1 Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Please observe the following cautions for your safety.
■ Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit may rise and may damage it.
■ Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are cov-
ered with a newspaper or cloth, heat may build up inside the unit and fire may result.
The cooling fan supplies cool air to the unit to prevent overheating.
Cooling Fan
SPEAKERS
(IMPEDANCE
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
AUX2 : Rear Panel
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Set-Top Box.
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com-
ponent.
2 Press the AUX button on the remote control to select <DIGITAL IN>.
■ You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ HDMI IN ➝ USB ➝ FM ➝ XM.
OPTICAL : Rear Panel
Optical Cable
(not supplied)
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1 Connect the AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■ Be sure to match connector colors.
2 Press the AUX button on the remote control to select <AUX2> input.
■ You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ HDMI IN ➝ USB ➝ FM ➝ XM.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to
this product.