Samsung 14-1196 - Manual (Page 6)

14-1196
E1-22801-04
02A02
Printed in Hong Kong
RadioShack Corporation
Fort Worth, Texas 76102
Note: Folders [A], [B], and [S] have been
prepared on the PC in advance. The date
subfolders and their recorded files are
created on the PC when you transfer the files
in the date subfolders.
When you transfer files, the filenames are
automatically changed on the PC and will
differ from the original file name on the
recorder.
Notes:
• You cannot transfer one file at a time.
• Transfer time varies depending on the
recording mode of a file and your PC’s
performance.
• You cannot upload files from the PC to
the recorder.
• You cannot transfer a file that has the
same recording date and time as a file
already in the corresponding folder on
the PC.
&
+4'%6
"4
'%14&+0)
You can record files directly to a PC using the
recorder’s microphone. The files are not
stored on the recorder.
1. Click the Direct Recording on PC icon on
the toolbar in the main window to display
the Recording Window dialog box.
2. Select the audio quality: HQ , SP , or LP .
3. Click Record to start recording. You can
use SUPER DIRECTION/NORMAL on the
recorder to adjust the micrphone’s
sensitivity.
4. To pause recording, click Pause .
5. Click STOP to stop recording. If you click
Quit , the recording window changes to
the main window. The recorded files are
stored in the recording folder in the PC’s
folder window.
2
.#;+0)
"(
+.'5
"
10
"
6*'
"2%
Any file transferred from the recorder or
recorded directly to the PC can be played
back on the PC. You cannot play back a file
that has not been transferred to the PC.
1. Choose the desired folder in the PC’s
Audio Folder window.
2. Click on the desired file in the list.
3. Click PLAY to play back the file.
You can also perform other operations, such
as fast-forwarding, rewinding, etc., with the
buttons and controls on the playback control
panel. Hold down fast-forward or rewind to
forward or reverse through the entire file.
Click the fast-forward or rewind icons to fast-
forward or reverse through the file
incrementally.
5
2'%+#.
"&
+)+6#.
"9
#8'
"2
.#;'4
"
(
70%6+105
+
0641
"5
%#0
1. Click on the desired file on the file list.
2. Click the Intro Scan icon on the tool bar.
The first 5 seconds of each file in the
selected folder are played back in turn.
3. To stop the playback, click STOP .
% 4'#6+0) "5 7$(1.&'45
You can create subfolders to sort files under
folders [A] and [B].
Note: You cannot create subfolders under
folder [S] or the date subfolders.
1. Click on the desired folder under which
to create subfolders.
2. Click Edit/Create New Folder . The Create
New Folder dialog box appears.
3. Enter a name for the new subfolder, then
click OK . Your new subfolder appears in
the Audio Folder window.
4. You can move files by dragging and
dropping files from a file list to other
folder in the PC’s or recorder’s folder
window.
5
'66+0)
"
6*'
"6
+/'
1&
#6'
"7
5+0)
"
6*'
"
2%
1. Connect the recorder to the PC, then
click Transfer/Transfer Date/Time .
2. Click OK . The time and date on the PC
are transferred to the recorder.
6417$.'5*116+0)
%#4'
Keep the recorder dry; if it gets wet, wipe it
dry immediately. Use and store the recorder
only in normal temperature environments.
Handle the recorder carefully; do not drop it.
Keep the recorder away from dust and dirt,
and wipe it with a damp cloth occasionally to
keep it looking new.
Modifying or tampering with the recorder’s
internal components can cause a malfunction
and might invalidate its warranty and void
your FCC authorization to operate it. If your
recorder is not performing as it should, take it
to your local RadioShack store for
assistance.
4 '5'66+0) " 6*' "4 '%14&'4
If the recorder stops operating properly,
follow these steps to reset it.
Important: Resetting the recorder clears all
information, including the date and time, as
well as other settings. Reset the recorder
only when you are sure the recorder is not
working properly.
Note: If you do not press a key for more than
eight seconds, the recorder returns to
standby and does not reset itself.
1. Hold down STOP , then ERASE for more
than two seconds.
9B;7Hý 9B;7Hý 9B;7Hý 9B;7Hý
appears.
2. Release both buttons.
9B;7H 9B;7H 9B;7H 9B;7H
and
O;I O;I O;I O;I
alternately appear.
3. Press ERASE again within eight seconds
to reset the recorder and erase all saved
information. Otherwise, press any other
key.
9>A 9>A 9>A 9>A
appears when all information is
erased.
2TQDNGO 5WIIGUVKQP
Nothing happens
after pressing a
button.
Make sure HOLD is set
in the opposite direction
from the arrow.
Make sure that fresh
batteries are correctly
installed.
There is no sound.
Make sure the volume is
turned up and that an
earphone is not
connected to the
recorder.
The playback
speed is too fast. Make sure the unit is not
set to fast playback.
The recorder will
not record.
<KBB <KBB <KBB <KBB
appears when
there should be
ample space.
Make sure the number of
recorded messages in
the selected folder has
not reached 100.
Make sure there is
enough remaining
recording time.
Make sure the number of
messages of the same
date in folder [S] has not
reached 15.
Operation is not
normal.
Reset the unit. (See
“Resetting the Recorder”
on Page 6.)
2TQDNGO 5WIIGUVKQP