Samsung NC10 - Manual (Page 2)

3-2
3. Disassembly and Reassembly
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
NC10
Part Picture Description
Main
System
6. Remove the memory by pushing the fixed-tap out.
7. Push the Hook up inwards by using a pin-set as shown in
the picture, and then lift the key board up.
[Notice]
When you push the hook up, you have to be careful not to
scratch Topdp.
As shown in the picture, lift the top side of keyboard up and
then disassemble keyboard.
8. Lift the Keyboard up, and then take the FPC out after
lifting the Connector Lock.
Take Keyboard FPC cable out after opening Keyboard
connector Lock.
Winchester_NC10_Eng.indb 2 2008-09-20 오후 1:36:13