Samsung RNX-EASYN4 - Manual (Page 13)

Wireless Router RNX-EasyN4 User Manual
8 Bring up RNX-EASYN4
Connect the supplied power-adapter to the power inlet port and connect it
to a wall outlet. Then, RNX-EASYN4 automatically enters the self-test phase.
During self-test phase, Power LED will blink briefly, and then will be lit
continuously to indicate that this product is in normal operation.
9 Smart Wizard
CHECK
•
Internet connection should be setup & ready to use (ADSL or cable modem).
• Modem must provide RJ45 port to connect with RNX-EASYN4.
• Microsoft Windows compatible PC/Notebook with UPnP enabled network adapter
• CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect RNX-EASYN4 WAN port & your modem WAN port with RJ45 cable.
STEP 2
Power up RNX-EASYN4.POWER led on front panel lights up & remains stable.
STEP 3
Connect RNX-EASYN4 LAN port & PC/Notebook RJ45 port with network cable.
Click on this icon to run SMART WIZARD.