Sony DAV-DZ531W - Manual (Page 34)

34 GB
To listen to the portable audio source sound through the system
Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel
of the unit with the stereo mini-plug cord (not supplied).
Tip
• When listening to MP3 format recordings using a portable audio source, you can enhance the sound.
Press FUNCTION +/– to select “AUDIO.” Connect the portable audio source. Press SOUND FIELD +/– repeatedly
until “A.F.D. STD” appears in the front panel display.
To cancel, select other than “A.F.D. STD.”
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL
or OPTICAL) jack
A digital satellite receiver can be connected to the SAT/CABLE (DIGITAL IN COAXIAL or
OPTICAL) jack instead of the SAT/CABLE (AUDIO IN) jacks of the unit.
To connect, use a digital coaxial cord (not supplied) for the DIGITAL IN COAXIAL jack or digital
optical cord (not supplied) for the DIGITAL IN OPTICAL jack.
The system can accept both digital and analog signals. Digital signals have priority over analog signals.
(COAXIAL has priority over OPTICAL.) If the digital signal ceases, the analog signal will be
processed after 2 seconds.
If you connect a digital satellite receiver without a DIGITAL OUT jack
Connect the digital satellite receiver to the SAT/CABLE (AUDIO IN) jacks only of the unit.
Note
• Be sure to make connections securely to avoid hum and noise.
• When you connect another component with a volume control, turn up the volume of the other components to a level
where sound is not distorted.
or
Digital optical cord
Digital coaxial cord