Samsung HCL4715W - Manual (Page 10)

1.3
C HAPTER O NE : Y OUR N EW TV
2
Y
O U R
N
E W
T V
ΠS-VIDEO INPUT jack
Use to connect an S-Video signal from a cam-
corder or a video game.
´ VIDEO INPUT jack
Use to connect a video signal from a camcorder
or a video game.
ˇ AUDIO INPUT jacks
Use to connect the audio signals from a cam-
corder or video game.
¨ PERFECT FOCUS
(HCL4715W/HCL473W/HCM5525W/
HCM553W/HCM6525W/HCM653W)
Press to adjust for the optimum picture set in the
Factory.
Front or Side Panel Jacks
You can use the front or side panel jacks to connect an A/V component that is used only
occasionally, such as a camcorder or video game. (For information on connecting
equipment, see pages 2.1 – 2.8.)
Using a display deck (HCL473W/HCM5525W/HCM553W/
HCM6525W/HCM653W)
You can display a VCR, a DVD player, etc. by using the display deck.
▲ HCL552W/HCL652W/HCL5515W/
HCL6515W
▲ HCL4715W
▲ HCL473W/HCM5525W/
HCM553W/HCM6525W/
HCM653W
1
Press the symbol “ “
at the center of the dis-
play deck.
2
As shown in figure
below, hold the center
of door and lift it in the
direction of arrow till a
‘ttok’ sound sounds.
3
After displaying a com-
ponent you have in the
display deck, hold the
center of door and pull
it down as shown in
figure below
4
Shut the door by
pressing the symbol
“
“.
➔
Note: You should display only the com-
ponent that is within 126mm high.
When displaying a component in the
display deck, please space it out 30mm
from the front, 20mm from either end.
01509D(E)-CHAPTER 1 2004/10/19 11:29 AM Page 3