Sanyo SCP-2300 - Manual (Page 10)

Viewing the Display Screen
This list identifies the symbols you’ll see on your display screen.
ᮣ shows your current signal strength. The more lines you
have, the stronger your signal.
ᮣ means your phone cannot find a signal.
ᮣ indicates a call is on hold.
ᮣ tells you a call is in progress.
ᮣ indicates the 1X Services/10-4 access are available.
ᮣ indicates the 1X Services/10-4 access are not available.
ᮣ indicates 1X Services/10-4 access are connected, but voice
calls can be sent or received.
ᮣ indicates 1X Services/10-4 access are active.
ᮣ indicates you have new text messages waiting.
ᮣ indicates you have new voicemail messages waiting.
Press and hold to call your voicemail box.
ᮣ indicates you have text messages and voicemail messages
waiting.
ᮣ indicates you are roaming on digital service network.
ᮣ indicates you are roaming on analog service network.
ᮣ indicates your phone is on analog service network.
ᮣ indicates the 10-4 service is enabled.
ᮣ indicates the 10-4 service is unavailable.
ᮣ indicates the 10-4 service is enabled and the speakerphone
mode is set to on.
ᮣ shows the level of your battery charge. The more black you
see, the more power you have left. It turns while charging.
ᮣ indicates you have menus to scroll (in four directions).
ᮣ indicates a beep sound is set at level 1.
ᮣ indicates the vibrate feature is set to ON.
ᮣ indicates volume level 4 and vibrate feature is set to ON.
ᮣ indicates the voice call ringer setting is OFF.
ᮣ indicates all the sound settings are OFF.
ᮣ indicates the Location Service of your phone is enabled.
ᮣ indicates the Location Service of your phone is disabled.
4