Sony TRV828 - Manual (Page 102)

102
Recording an image from a tape as a still
image
Your camcorder can read moving image data recorded on a tape and record it as a still
image on a “Memory Stick.”
Your camcorder can also take in moving image data through the input connector and
record it as a still image on a “Memory Stick.”
Before operation
Insert a recorded tape and a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. The image recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the image from the tape freezes.
“CAPTURE” appears on the screen. Recording does not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the “Memory Stick.” Recording is complete when the bar scroll indicator
disappears.
Image size of still images
Image size is automatically set to 640
×
480.
When the acccess lamp is lit or flashing
Do not shake or strike the unit. Also do not turn the power off , eject the “Memory
Stick” or remove the battery pack. Otherwise, an image data breakdown may occur.
If appears on the screen
The inserted “Memory Stick” is incompatible with your camcorder because its format
does not comform with your camcorder. Check the format of the “Memory Stick.”
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a tape
You cannot record the audio from a tape.
Titles superimposed on tapes
You cannot record the titles on the “Memory Stick.” However, you can record titles
which have already been recorded on tapes.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
1 2
3 4
CAPTURE
REW PLAY FF
C
AM
ER
A
M
EM
ORY
VC
R
O
FF
(C
H
G
)
POWE
R
PHOTO
PHOTO