Specialized Enduro 6 - Manual (Page 10)

0
DEMO 8 FRAME GEOMETRY
.”
0.8”
4.7”
6°
64°
66°
6°
4.96”
4.49”
47.6”
6.7” 9mm
769mm
0mm
6°
64°
66°
6°
80mm
68mm
0mm
4mm 0mm
74mm
0mm
6°
64°
66°
6°
80mm
68mm
9mm
4mm 7mm
79mm
0mm
6°
64°
66°
6°
80mm
68mm
8mm
4mm .64”
9.88”
4.7”
6°
64°
66°
6°
4.96”
4.49”
46.7”
6.7” .6”
9.69”
4.7”
6°
64°
66°
6°
4.96”
4.49”
4.6”
6.7” 


4
4


6
6
7
8
FRAME SPECIFICATIONS
Head tube:  /8”
Seatpost: 0.9mm
Front derailleur clamp: 4.9mm
Rear hub spacing: mm (6mm Drive-Side offset)
BB shell: 7mm
Seat Collar: 4.9mm
Stroke: 69.9mm (.7”)
Eye-To-Eye: .mm (8.7”)
Travel: 8.4”
Sag: 0-% (-4mm of stroke)
Medium Large Small
*Top Tube Length
**Standover Height
Head Tube Length
Head Angle - Steep
Head Angle - Slack
Seat Angle - Steep
Seat Angle - Slack
BB Height - High
BB Height - Low
Wheelbase
Chainstay Length
* TT length is the Horizontal Measurement from the center-line of the HT at the top of the HT to the center-line of the projected seat tube.
** Stand Over height is measured vertically at the centerpoint of the TT measurement.
NOTE: Spring weights listed are to be used as an adjustment starting point
only. Rider weight and riding style may require a different spring rate than
the stock spring rate. Replace the spring accordingly. Refer to your shock
manufacturer’s manual for additional shock setup information. SPRING RATE
400lb
40lb
00lb
RIDER WEIGHT
<0lb
0-8lb
8-0lb
SIZE
Small
Medium
Large