Sinar Rolleiflex 6008 Integral - Manual (Page 7)

7
Zoom extension tube 22 – 68 mm
Variable extension tube with precise helical focusing
mount for extensions from  to 68 mm. Gives easy
access to close-up photography without gaps or com-
ponent changes. Primarily suited for use with Zeiss
lenses from 40 to 50 mm. In conjunction with the
reversing adapter, reproduction ratios far beyond 1:1
are possible. Only partly suitable for use with wide-
aperture lenses.
Cat. No. 711.61.038
Reversing adapter
Extends the uses of your Rolleiflex in close-up photog-
raphy. Allows reverse-mounting of lenses from 50 to
10mm focal length while retaining all automatic func-
tions. Should preferably be used in conjunction with
the bellows unit. With a reverse-mounted Planar 80
mm f/.8, for example, reproductions ratios from 1.8:1
to 3.5:1 can be attained.
Cat. No. 711.61.040
Extension tubes
9, 17, 34, 67 mm long; retaining all automatic func-
tions, can be used alone or in various combinations,
also with bellows unit and reversing adapter. Rollei
bayonet on either side.
9 mm Cat. No. 711.61.030
17 mm Cat. No. 711.61.032
34 mm Cat. No. 711.61.034
67 mm Cat. No. 711.61.036
2x Teleconverter HFT
Designed for use with any of the standard, telephoto
and zoom lenses, this converter doubles the focal
length of the basic lens. Initial apertures are reduced by
two f-stops. The sophisticated optical design leaves the
performance of the basic lens almost fully intact. The
minimum focusing distance of the basic lens also
remains unchanged.
Cat. No. 711.61.042
Close-up Accessories / Converters