Sony CMT-EP505 - Manual (Page 14)

14 GB
Tape
Loading a tape
1
Press Z PUSH OPEN/CLOSE.
2
Insert a tape in deck with the side you
want to play/record facing forward.
Playing a tape
You can use TYPE I (normal), TYPE II (CrO
2
)
(CMT-EP505 only) or TYPE IV (metal)
(CMT-EP505 only) tape.
1
Load a recorded tape.
2
Press TAPE.
3
Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly to select
g
to play one side, h to play both sides,
or j * to play both sides repeatedly
(CMT-EP505 only).
* The tape automatically stops after playing
back five times.
4
Press nN (CMT-EP505) or N ( nN
on the remote, CMT-EP404).
Press nN again to play the reverse
side (CMT-EP505 only).
To
Stop play
Pause
Fast-forward or rewind
Remove the cassette
Insert with the side
you want to play/
record facing forward.
Do this
Press x.
Press X.
Press again to resume play.
With the tape stopped, turn
m/M clockwise or
counterclockwise (or press
m or M on the remote).
Press Z PUSH OPEN/
CLOSE.
Finding the beginning of a
track (AMS*) (CMT-EP505
only)
During playback, turn ./> clockwise or
counterclockwise (or press . or > on
the remote).
The tape is wound or rewound to the beginning
of the next or current track, and play will start
automatically. The search direction, “+”
(forward) or “–” (back), and “1” appear in the
display.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between tracks is less
than 4 seconds long.
– When the system is placed near a television.