Samsung SWL-2200U - Manual (Page 63)

63
A3. Check if you are in the range of the Access Point.
A4. Reinstall the driver using MagicLAN Software CD if driver dosen’t work.
Q. Samsung’s tray icon in the task bar shows red color .
A. This is same to above question. Please refer to the above A1~A4.
Q. Link Status is excellent, but I can’t connect to the network.
If TCP/IP setting is not properly established , you can’t connect to the network.
A. Check TCP/IP setting.
When you are using DHCP server, if allocated IP address is insufficient, you can’t use
network. In a case like this, please ask the network manager.
Q. A system identify the Wireless LAN Card, but I can’t connect the network.
If there’s many network adapter in the system, wireless LAN may not work
properly.
A. Open Device Manager and set disable the unused network adapter(PPP adapter ,etc.) by
clicking right mouse.
Q. I want to use Samsung client utility in the Windows XP. But, we can’t set up correctly.
A. Windows XP provides each configuration utility of LAN and Wireless LAN by OS in
itself. In case of this, you must select the “Manage the Wireless Control by this utility
under WinXP” in the Option menu of General Settings in the Samsung client utility.
Q. I can’t see the TCP/IP informations in the MagicLAN Utility.
A. It’s related to a file, IPHLPAI.dll. Please reboot the system.
There maybe some systems that don’t show their IP, Subnet Mask, Gateway, DNS, Adapter
Name.
Q. When we use IPX/SPX protocol with NETWARE CLIENT, we can’t connect to the
network game like STARCRAFT and local server.
A. In case of Windows 2000, please click Start – Settings – Control Panel – Network and
Dial-up Connections(double click)’. Click a right mouse button on the Local Area
Connection menu and select Properties. Then, you need to double-click NWLink
IPX/SPX/NetBIOS Compatible Transport Protocol and then change Frame Type from
Auto Detect to Ethernet 802.3.
In case of Windows 98, please click Start – Settings – Control Panel – Network(double
click)’. Then, you need to double-click IPX/SPX-compatible Protocol ->
SAMSUNG … and then change Frame Type from Auto to Ethernet 802.3 in
theAdvanced tap.