Sony SAT-A55 - Manual (Page 65)

65
O
the
r
Inf
o
rma
tio
n
The RM-Y139 and RM-Y802 remote controls can be programmed to
operate your other audio/video equipment.
+
SATELLITE
RECEIVER
2
8
3
4 5 6
9
SLEEP TV/SAT TV/VIDEO
FUNCTION
SAT CABLE
AUDIO
VOLUME
ENTER DISPLAY
MUTING
CABLE
ALT AUDIO JUMP
GUIDE INDEX FAVORITE
VOL
RM-Y802 VTR3 2 DVD AMP
MENU
EXIT
CH
1
7
TV
TV
CATEGORY
CODE SET
0
POWER
SAT
z Tips
• Remember to aim the remote control at
the device you are trying to operate.
• To control extra VTRs (VCRs), a DVD
player or an amplifier with the
RM-Y802 remote control, slide the
device switch to VTR2, 3, DVD or AMP
after you have set up the remote with
the correct manufacturer code.
RM-Y802
Remote Control
1 Find the code(s) for the manufacturer of the
device you want to operate with this remote
control.
You can find these codes on pages 66 and 67.
2 Press the CODE SET button.
The function indicators begin flashing.
3 Press the 0–9 buttons to input the manufacturer
code, then press the ENTER button.
The function indicator goes off, and the remote is setup to operate
that device.
4 Test the remote control.
Press the POWER button for that equipment, then press other
operation controls such as the CH +/– buttons.
If the device does not respond to the remote control, repeat from
step 2 and enter a different manufacturer code in step 3.
CODE SET
FUNCTION
SAT CABLE TV
1 0 1
ENTER
Other Information
Setting Up the Remote Control