Sony CDX-CA890X - Manual (Page 15)

15
Tips
• Simply overwrite or enter “
” to correct or erase a
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
Erasing the station name
(With the card remote commander)
1
During radio reception, press (MENU),
then press (DISC) (+) or (DISC) (–)
repeatedly until “NAME DEL” appears.
2
Press (ENTER).
3
Press (DISC) (+) or (DISC) (–)
repeatedly to select the station whose
name you want to erase.
4
Press (ENTER) for 2 seconds.
The name is erased.
Repeat steps 3 to 4 if you want to erase other
names.
5
Press (MENU) twice.
The unit returns to normal radio reception
mode.
Note
If you have already erased all of the station names,
“NO DATA” appears in step 4.
Tuning in a station through a
list
— List-up
(With the card remote commander)
1
During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
2
Press (DISC) (+) or (DISC) (–)
repeatedly until you find the desired
station.
If no name is assigned to the selected station,
the frequency appears in the display.
3
Press (ENTER) to tune in the desired
station.