Socket Mobile 3E - Manual (Page 29)

OPTIONAL: Perform a Scan Test
1. In the main screen of SocketScan, make sure the SDSC scanner is
enabled and tap Test.
2. Tap Scan to trigger the scanner and scan a bar code.
You cannot use the hardware trigger button for the scan test. Use
the Scan button to trigger the scanner.
3. SocketScan will report the encoded data, as well as its symbology type
and length. To view the data in hexadecimal format, check View as Hex.
4. When done, tap OK to exit the Test Scan.
CHAPTER 3: SETUP FOR PALM 29