Savin 1045 - Manual (Page 158)

Key Operator Setting
144
8
❖ ❖ ❖ ❖ Paper Tray
Use this feature to output the doc-
uments received from programed
senders (special senders) and the
documents from other senders on
different types of paper.
For example, if you supply blue
paper in tray 1 and white paper in
tray 2, the machine outputs the
documents from special senders
on the blue paper and outputs the
documents from other senders on
the white paper, making it easy for
you to discriminate between the
two.
If you do not program any special
senders, the machine outputs the
documents received from all send-
ers using default paper tray.
Limitation
❒ During polling reception and
free polling, you cannot select
the paper tray.
Note
❒ If the machine receives an mes-
sage that is a different size from
the paper that is in the specified
tray, the machine prints the
message after splitting it or min-
imizing its size.
⇒ P.85 “Page
Separation and Length Reduction
(Not Available in Some Coun-
tries)”
❒ Selection of the bypass tray (op-
tional) enables you to specify
the paper size in "Scan Area".
The factory default is set to "Au-
to detect".
programing/Changing Special Senders
A
Press the
{{{{User Tools/Counter}}}} key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
C
Select [Key Operator Tools].
D
Select [Program Special Sender].
Note
❒ If "Program Special Sender" is
not shown, press [
U U U U Prev.] or [T T T T
Next] .