Stanton C.501 - Manual (Page 9)

8
OPERATIONS
6. Pausing
Press the PLAY/PAUSE button to switch the play and pause.
The play indicator flashes when the pause mode is set.
Figure 6 show the relationship between the play and pause.
2 4 6
1 5
3 7
Figure 6
The player has completed the cue or pause operation
and is waiting for the play start command.
When the PLAY/PAUSE button is pressed and enter play
mode.
Playing.
The pause mode is set when the PLAY/PAUSE button is
pressed again
Pausing.
Playback resumes when the PLAY/PAUSE button is
pressed again.
Playing.
7. Cueing
"Cueing" is the action of preparing for playback.
Press CUE button, the player will enter cue mode, the playback returns to cue point and enter pause condition, the
cue indicator light up and play indicator flashes. When PLAY/PAUSE button is pressed, play starts from the cue
point.
When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the
position at which the sound starts and cues there(Auto Cue).
If the CUE button is pressed after the search operation or the scanning operation, the playback returns to cue point
and enter pause condition.
Figure 7-1 shows the relationship between the play and back cue operations.
6 2 4
1 5
3
2
1
8
9
3
9
7
8
Figure 7-1
The player has completed the cue or pause operation
and is waiting for the play start command.
When the PLAY/PAUSE button is pressed, playback
starts and the cue point is stored in the memory.
Playing.
The pause mode is set when the PLAY/PAUSE button is
pressed again.
Pausing.
When the PLAY/PAUSE button is pressed again;
Playing.
Press the CUE button.
The pickup returns to the cue point.(Back Cue)
Cue point setting:
When play starts from pause by pressing IN button or Scanning or Frame Search; also skip to a new track by using skip
button, the begin play point will be set to the new cue point.
When a new cue point is set, the cue indicator lights by flash for about 1 second.
NOTE: Daring cue mode, if the CUE button is pressed and hold, playback will start from the cue point, when the button
is released, the player will return to the cue mode automatically, it allows you to check the cue point.
8. JOG WHEEL - The jog wheel serves two functions depending on the current operating mode:
The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set a
specific cue point or find a particular starting point.
The inner wheel also works as a momentary pitch bend during playback. Turning the wheel clockwise will increase the
pitch percentage up to 4%,8%,16%, and turning the wheel in the counterclockwise direction will decrease the pitch
percentage up to -16%. The pitch bend will be determined on how fast you turn the wheel.