Sony D-NF431 - Manual (Page 31)

Presetting Radio
Stations
You can preset up to 51 stations (for USA and
Canadian models) : 7 for TV, 4 for WB, 30 for
FM and 10 for AM or 40 stations (for other
models) : 30 for FM and 10 for AM.
1
Press RADIO ON/BAND•MEMORY to
turn on the radio.
2
Press RADIO ON/BAND•MEMORY to
select the band.
3
Press SEARCH for 3 seconds or
more.
The CD player starts scanning the stations
from the lower frequencies and stops
for about 5 seconds when a station is
received.
4
If you want to preset the received
station, press  until the preset
number appears.
The received station is preset on the
preset number 1 and the CD player starts
scanning for the next receivable station.
If you do not press
 within 5 seconds,
the CD player will start scanning the next
receivable station without storing the
station.
5
Repeat step 4 until all receivable
stations are preset.
If the stations have already been stored,
the newly preset stations will replace the
old ones.
Note
Presetting will not be completed until scanning
of all receivable stations is finished. If you cancel
presetting before scanning of all receivable stations
is finished, the stations you preset are not stored in
the CD player’s memory.
Presetting stations
manually
1 Press RADIO ON/BAND•MEMORY to
turn on the radio.
2 Press RADIO ON/BAND•MEMORY to
select the band.
3 Press TUNE + or – to tune in the station
you want.
4 Press and hold RADIO ON/BAND•
MEMORY until the preset number
appears on the display.
When the station is preset successfully,
the beep is heard.
The preset number increases by one.
5 Repeat steps 3 and 4 when you preset the
stations in the same band.
When you preset the stations in the
different band, press RADIO ON/
BAND•MEMORY to select the band.
Repeat steps 3 and 4 until the preset
number appears on the display.
Note
Preset number is selected automatically. You cannot
select the preset number.
Continued 
31
Using the Radio
D-NF430/NF431.GB.2-663-956-11(1)