Sony D-NF431 - Manual (Page 14)

When using the AC power
adaptor
You can use the player powered by the AC
power adaptor without the battery.
to DC IN 3 V
AC power adaptor
to an AC outlet
1
Connect the AC power adaptor to
the DC IN 3 V jack of your CD player
and an AC outlet.
Notes on the AC power adaptor
• Disconnect all power sources when the player is
not to be used for a long time.
• Use only the AC power adaptor supplied. If your
player is not supplied with an AC power adaptor,
use an AC-E30HG AC power adaptor*. Do not
use any other AC power adaptor. It may cause a
malfunction.
* Not available in Australia and some other
regions. Ask your dealer for detailed
information.
Polarity of the plug
• Do not touch the AC power adaptor with wet
hands.
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor, disconnect it
from the AC outlet immediately.
For models with a voltage selector in the
supplied AC power adaptor
Before using the AC power adaptor, set it to the
voltage of the local AC power supply, “100 V -
120 V” or “220 V - 240 V”.
Use a screw
driver to turn
the rotary
switch.
For models supplied with the AC plug
adaptor
If the AC power adaptor does not fit the wall outlet,
use the AC plug adaptor.
14
D-NF430/NF431.GB.2-663-956-11(1)