Drive/freewheel operation (fig 8) – Shoprider TE-787M User Manual

Page 10

Advertising
background image

8/12/2004

10

DRIVE/FREEWHEEL OPERATION (FIG 8)


The drive/freewheel lever (yellow handle) is located next to the right rear wheel. This lever
allows you to disengage the drive mechanism and push the scooter while in freewheel
mode. To disengage the drive mechanism, lift the lever in the up position (the scooter can
now be pushed). To re-engage the drive mechanism, push the freewheel lever in the down
position (now the unit may be driven).


WARNING! Always re-engage the free wheeling device after use. Failure to do so
may result in injury.


Anti-tip wheels
The anti-tip wheels are located at the rear of the scooter frame (Fig 8). The scooter should
not be used unless the anti-tipping wheels are in place.

Shoprider® is not responsible for damage or injury incurred due to improper or
misuse of the scooter.















Figure 8

Free Wheel
Lever (yellow)

Anti-Tip Wheels

Push Scooter

Drive Scooter

Advertising