Samsung ML 1740 - Manual (Page 36)

S ETTING U P Y OUR P RINTER 2.19
2
Removing the Printer software
1 From the Start menu, select Programs.
2 Select Samsung ML-1740 Series and then Printer
Driver Maintenence .
3 Select Remove and then click Next.
4 Select the components you want to remove and click Next.
5 When you are asked to confirm your selection, click OK.
6 Aftern the software is removed, click Finish.
Changing the Display Language
After installation of the software, you can change the display
language. If you installed the Status Monitor, the selected
language is applied to it.
1 From the Start menu, select Programs.
2 Select Samsung ML-1740 Series and Language
Selection.
3 Select the language you want from the language selection
window and click OK.