Setting the date and time, Display in idle status – Siemens SL370 User Manual

Page 10

Advertising
background image

9

First steps

Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / starting.fm / 14.8.07

Ve

rs

ion 4,

16

.09.

2005

Initial charging and discharging of the

battery pack

If the handset is activated, the flashing

battery icon

e in the top right of the dis-

play indicates that the battery pack is

being charged.
During handset operation, the battery

icon indicates the charge status of the bat-

tery pack (page 1). The correct charge sta-

tus can only be displayed if the battery

pack is first fully charged and discharged.

¤

To do this, leave the handset in the

charging cradle continuously for ten

hours. Your handset need not be

switched on for it to charge.

¤

Afterwards, remove the handset from

the charging cradle and do not put it

back again until the battery pack is fully

discharged.

Please note:

u

Always repeat the charging and dis-

charging procedure if you remove the

battery pack from the handset and

insert it again.

u

The battery pack may warm up as it is

charging. This is not dangerous.

u

After a time the charge capacity of the

battery pack will decrease for technical

reasons.

Setting the date and time

Set the date and time so that the correct

date and time can be assigned to incom-

ing calls, and so that the alarm and the cal-

endar can be used.

¤

If you have not yet set the date and

time, press the display key

§Time§

to open

the input field.

To change the time, open the input field

with:
w

¢

Ð

¢

Date/Time

¤

Change multiple line input:

Date:

Enter the day, month and year in 8-digit

format.

Time:

Enter hours and minutes as 4 digits

(e.g.

Q M 5 for 07:15 a.m.

§Save§

Press the display key

Display in idle status

Once the phone is registered and the time

set, the idle display looks as shown here

(example). If the answer machine (Gigaset

SL375 only) is activated, the answer

machine icon

× will also be displayed in

the header:

Your answer machine is set with a stand-

ard announcement.
Your phone is now ready for use.
If you have any queries about using your

phone, please read the tips on trouble-

shooting ("Questions and answers,

page 61) or contact our customer service

department ("Customer Care", page 62).

Please note:

After the first battery charge and discharge,

you may place your handset in the charging

cradle after every call.

Ð

V

INT 1

15.11.07

07:15

?

SMS

Advertising
This manual is related to the following products: