Siemens SL370 - Manual (Page 45)

44
Using several handsets
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / registr_sett.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
s Select one of the registered
base stations or Best Base and
press §OK§ .
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
Or:
u
Initiate internal call.
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Initiate internal call.
* Press the star key. All handsets
are called.
Ending a call
a Press the end call key.
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
u
Open list of handsets.
The external participant hears
hold music if activated (see
page 58).
s Select a handset or Call All and
press §OK§ .
When the internal participant answers:
¤
If necessary announce the external call.
a Press the end call key.
The external call is transferred to the other
handset.
If the internal participant does not answer
or the line is busy, press the display key
§End§ , to return to the external call.
When transferring a call you can also press
the end call key a before the internal
participant answers.
Then, if the internal participant does not
answer or the line is busy, the call will
automatically return to you (the display
will show Recall ).
Internal consultation/conference calls
When you are speaking to an external
participant, you can call an internal par-
ticipant at the same time for consultation
or hold a conference call between all
3 participants.
You are conducting an external call.
u
Open list of handsets.
The external participant hears
hold music if activated (see
page 58).
s Select handset and press §OK§ .
You are connected with the
internal participant.
Either:
§End§ Press the display key.
You are reconnected with the
external participant.
Or:
§Conference§ Press the display key.
All 3 participants are con-
nected with each other.
Ending a conference call
a Press the end call key.
If an internal participant presses the end
call key a, the other handset remains
connected to the external participant.
Accepting/rejecting call waiting
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number or
name will appear in the display if Calling
Line Identification is enabled.