Siemens SL370 - Manual (Page 48)

47
Using several handsets
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / registr_sett.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
Changing the set destination number
v
¢
í
¢
Room Monitor
s Scroll to the Call to: line.
X or §Delete§
Delete existing number.
¤
Enter and save number as described in
"Activating the room monitor and
entering the number to be called"
(page 46).
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key §OFF§ on the handset.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with §Save§ (page 46).
Walky-talky mode
Walky-talky mode allows two handsets to
communicate with each other, both inside
and outside the range of the base station
to which the handsets are registered.
Handsets that are to communicate with
each other using walky-talky mode must
meet one of the following conditions:
u The handsets are all registered to the
same base station.
u The handsets are set to Best Base or are
not yet registered.
In walky-talky mode, if you press the talk
key c or the handsfree key d , the call
will go to all handsets that are in walky-
talky mode. The connection is made with
the first handset to accept the walky-talky
call.
Activating/deactivating walky-talky
mode
v
¢
í
¢
Walky-Talky
Use §OK§ to activate walky-talky mode.
You can now:
§OFF§ Press the display key. Walky-
talky mode is switched off.
or
> Press the display key to open
the menu.
The following functions can be selected
with q:
Audio Settings
You can set Ringer Settings (see
page 51) and Advisory Tones (see
page 52) for walky-talky mode.
Room Monitor
You can use the handset in walky-talky
mode as a room monitor.
Using a handset in walky-talky mode
as a room monitor
¨
¢
Room Monitor
¤
Change multiple line input:
Room M.:
Select On to activate.
Level:
Set noise level sensitivity ( Low or High ).
¤
Save changes (page 65).
Please note:
u The maximum range outdoors is
300 m.
u Handsets that are in walky-talky mode
are not available for phone calls.
u The handset operating times are
greatly curtailed.