Siemens SL370 - Manual (Page 61)

60
Connecting the base station to the PABX
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / pabx.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c and sending the number.
w Open
menu.
N 5 O
L
Press keys.
~ Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press §OK§ .
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
w Open
menu.
N 5 O
2
Press keys.
~ Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press §OK§ .
Changing a dialling pause (pause after
access code)
Precondition: You have saved an access
code (page 59).
w Open
menu.
N 5 O
Press keys.
~ Enter a digit for the length of
the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press §OK§ .
To insert a dialling pause: press S for
2 seconds. A P appears in the display.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dial-
ling (DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call is ended, pulse dialling is
automatically switched on again.