Connecting to a power source, Using the dry batteries – Sony Atrac3/MP3 CD Walkman D-NE306CK User Manual

Page 28

Advertising
background image

28

B

Connecting to a power source

Using the dry batteries

Use only the following dry battery type for
your CD player:
• LR6 (size AA) alkaline batteries

For the battery life, see “Specifications.”

Note

Be sure to remove the AC power adaptor when
using the dry batteries.

1

Slide OPEN to open the lid of your
CD player, then open the battery
compartment lid inside the player.

2

Insert two LR6 (size AA) batteries
by matching the

3

to the diagram

in the battery compartment and
close the lid until it clicks into
place.

Insert the # end first
(for both batteries).

When to replace the batteries

You can check the remaining power of the
batteries in the display.

t

t

t

t

t Lo batt*

* Beep sounds.

When the batteries are depleted, replace both
batteries with new ones.

Notes

• The indicator sections of

roughly show the

remaining battery power. One section does not
always indicate one-fourth of the battery power.

• Depending on operating conditions, the indicator

sections of

may increase or decrease.

To remove the batteries

Remove the batteries as illustrated below.

To attach the battery compartment lid

If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.

Advertising