Sony Ericsson P800 - Manual (Page 21)

Getting to know your P800 21
This is the Internet version of the user’s guide. © Print only for private use.
To attach the flip replacement
1. The flip replacement has two hooks at the bottom edge.
These hooks will fit into the two recesses at the, now opened,
bottom of the P800. Align the flip replacement until it is
almost in place, then gently push it upwards towards the
screen. A distinct click will let you now that it is in correct
place.
To remove the flip replacement
1. Put your nail or the end of the stylus in the hollow right
below one of the catches and prise the edge of the cover plate
upwards. A distinct click will let you know that the catch has
released. Continue with the second catch.
To attach the keypad
1. To attach the key pad you have first have to remove the flip
replacement (if mounted). Place the key pad so that its
release catch is facing the arrow on the now opened bottom
of the P800. The key pad will be in a more or less horizontal
angle at this time.
Note At the end of the flip key pad there is a hinge, which is
adjustable in three positions. Make sure the hinge is in its
middle position when you attach it.