Sharp AQUOS 10P02-MX-NM - Manual (Page 14)

12
Introduction to Connections
Experiencing HD Images
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD programming from the following:
Over-the-air broadcasting via HD quality antenna
HD cable/satellite subscription
HD compatible external equipment
For information on updating to HD programming, ask your cable/satellite service provider.
Types of Connection
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriate terminals for higher quality images.
The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Page 13
HD
Quality
Standard
Quality
Terminal
on the TV
Cable
Terminal on external
equipment
Image
Quality
AV cable
(AV mini plug and RCA plugs)
Component video cable
Audio cable
HDMI-certified cable
Ø 3.5 mm stereo minijack cable
AUDIO
DVI OUT
DVI-HDMI conversion cable
Page 13
Page 14
Page 14
•
•
•
•
•
1
Press INPUT.
The CH List screen displays.
2
Press a/b to select the input source.
You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
INPUT1 INPUT2 INPUT3
INPUT4 TV
An image from the selected source automatically
displays.
If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
•
•
•
•
INPUT INPUT
INPUT
TV
INPUT1
INPUT2
INPUT3
CH List
Menu
CABLE AIR
Example
INPUT
TV
INPUT1
INPUT2
INPUT3
CH List
Menu
CABLE AIR
Example
Displaying an External Equipment Image
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.