Sony 4-269-995-13(1) - Manual (Page 13)

13 GB
Getti
ng Sta
rt
e
d
7: Performing the initial
set-up
1
Connect the TV to your AC power
outlet (mains socket).
2
Press 1 on the TV. The = (power)
indicator will light up in green.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
~
• When you turn on the TV for the first time, the
TV requires some internal processing for
optimization before you can perform the
initial setup. There will be no picture and
sound, and the timer indicator on the front of
the TV blinks orange for about 40 seconds. Do
not turn off the TV during this process.
This process has been completed at the factory
for some TVs.
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
~
• “Full Scan” may not be available depending
on your region/country.
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1
Press F/f to select the channel you want
to move to a new position, then press .
2
Press F/f to select the new position for
the channel, then press .
~
• You can also tune channels manually.
3
Except KDL-46/40/
32CX52x KDL-46/40/32CX52x