Sony CDX-C780 - Manual (Page 12)

12
EN
Erasing tracks in a program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
To select Program 2, press (5) (n)
repeatedly until “P 2” appears.
2
Press (2) (N) or (5) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Program 1.
3
Press (6) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (4)
(PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
µ
PLAY
TRACK
MODE ENTER
PLAY
TRACK
MODE ENTER
PLAY
DISC TRACK
MODE ENTER
Track slot number
PLAY
TRACK
MODE ENTER
PLAY
TRACK
MODE ENTER
Adding tracks to a program
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
“P 1 ” shows Program 1 is selected.
To select Program 2, press (5) (n)
repeatedly until “P 2” appears.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press (6) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
5
To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 12 slots have been filled, “*Mem
Full*” appears in the display, and you cannot
insert tracks.
6
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
7
Press (SHIFT).
PLAY
TRACK
MODE ENTER