SUPER MICRO Computer X6QTE+ - Manual (Page 95)

Appendix C: Software Installation
C-7
5 Press Enter when both disks for the new array are selected. The Array Properties
menu displays (as the screen shown below).
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to the
array.
*Caution: Once the array is created and its properties are assigned, you cannot
change the array properties using the ACU. You will need to use the Adaptec Stor-
age Manager - Browser Edition. (Refer to Adaptec's User's Guide in the enclosed
CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the screen below), select an array
type and press Enter.
Note that only the available array types: RAID 0, and RAID1 are displayed on the
screen. (*RAID 0 or RAID 1 requires two drives.)