Samsung Digimax GX-1S - Manual (Page 115)

ŝ114Ş
Setting the Recorded Pixels and Quality Level
Sensitivity is not corrected in the following situations or settings.
ƃ Exposure mode is (Manual) or (Bulb) mode
ƃ Flash is discharged
ƃ Auto bracketing
ƃ EV Compensation
INFORMATION
ƈ ISO Sensitivity Warning appears in the viewfinder when a sensitivity value of your choice is reached
or exceeded. Set a sensitivity that is not regularly used to avoid forgetting to reset when sensitivity is
raised. ISO Sensitivity Warning is not displayed by default.
ISO Sensitivity Warning Display
1 Off ISO Sensitivity Warning is not displayed.
2 ISO 400 ISO Sensitivity Warning is displayed when ISO 400 is reached or exceeded.
3 ISO 800 ISO Sensitivity Warning is displayed when ISO 800 is reached or exceeded.
4 ISO 1600 ISO Sensitivity Warning is displayed when ISO 1600 is reached or exceeded.
5 ISO 3200 ISO Sensitivity Warning is displayed when ISO 3200 is reached.
ƃ Set in [ISO Snstvty Wrn Dspl] in the [ Custom Setting] menu.
(p.100)
ƃ (ISO Sensitivity Warning) appears in the viewfinder when
the set sensitivity is set or exceeded.
ƃ ISO Sensitivity Warning is not displayed if sensitivity is automatically corrected (p.113).
INFORMATION